Home › Camera repair › Illinois › Des Plaines
Camera repair in Des Plaines, IL
1 dedicated repair shop and 1 camera store with a repair bench in Des Plaines. Two quotes are worth getting on anything over $200 — the published range for a full overhaul is $278–378, and shops sit all across it.
2Repair options
1Dedicated shops
1Sensor cleaning
$25–58Clean and check
2–4 wksTypical turnaround
Where to get a camera repaired in Des Plaines
MYK Camera Repair
5 ★★★★★ 235 reviews
Camera repair shop Repairs are the business
Camera repair shop (since 1986) specializing in Sony, Canon and JVC equipment.
Alpine Camera
4.2 ★★★★☆ 122 reviews
Camera store Sensor cleaning
Veteran go-to for new & used cameras & lenses, plus video transfer & photo restoration services.
What you should be quoted
| Job | Published range |
|---|---|
| Clean and check | $25–58 |
| Tune-up | ~$128 |
| Full overhaul | $278–378 |
| Stuck aperture | $78+ |
| Fungus removal | $78–228 |
| Light seal replacement | $80–120 |
| Lens CLA | $125–165 |
| Bench / estimate fee | $24–85 — ask whether it is credited toward the repair |
Before you drop it off
- Ask if the work is done in-house. A shop that sends it out typically adds 4–6 weeks to the job.
- Ask what the bench fee is and whether it is credited against the repair. It ranges $24–85, and declining an estimate can cost real money — KEH charges $100 for a declined re-estimate.
- Ask about the current backlog. 2–4 weeks is normal at an independent; busy periods run longer.
- Compare against the used value of the body before you approve anything. A repair that costs more than a clean replacement is not a repair, it is a hobby.
- Flag a gray-market import. Independents will work on it; Nikon will refuse to service one at any price.
Camera repair in Des Plaines: common questions
- How much does camera repair cost in Des Plaines?
- Independent rates are consistent nationally: clean-and-check $25–58, tune-up about $128, full overhaul $278–378, stuck aperture from $78, fungus removal $78–228, light seals $80–120, and a lens CLA $125–165. Add a bench or estimate fee of $24–85 unless the shop credits it toward the work. Get a written quote before anyone opens the body.
- What should I ask when I call?
- Three things. What is the bench fee, and do you credit it toward the repair — that is a swing of up to $85 on the same job. Do you do this work in-house, because sending it out typically adds 4–6 weeks. And what is your current backlog, since 2–4 weeks is normal at an independent but a busy shop can be well past that.
- Should I use a Des Plaines shop or send it to the manufacturer?
- Independents typically run 20–40% cheaper than manufacturer service centers and turn work around faster, and they will take on film bodies that the manufacturers stopped servicing years ago. Use the manufacturer for in-warranty work and very new bodies with restricted parts. One hard limit worth knowing: Nikon will not service a gray-market import at any price, so if that is your camera, an independent shop is the only route.
- When is a repair not worth it?
- When the quote exceeds what the camera is worth used, and on point-and-shoots almost always — parts are unavailable and the labor alone outruns the value. A clean-and-check at $25–58 is the cheapest way to find out which situation you are in before you commit to anything bigger.